|
Elbe Crossing 2 is a group of transmission towers providing overhead lines for four 380 kV three-phase alternating current (AC) circuits across the German river Elbe. It was constructed between 1976 and 1978 to supplement Elbe Crossing 1, and consists of four towers: * A 76-metre-tall anchor pylon located in Lower Saxony, on the Elbe's southern banks. * Two carrying pylons, each 227 metres tall. One is located on the island of Lühesand and the other is near Hetlingen in Schleswig-Holstein, on the northern shore. :These pylons are the tallest pylons in Europe and the sixth tallest of the world. They stand on 95 stakes because of the unfavorable building ground. The base of each pylon measures 45×45 metres and each pylon weighs 980 tons. Crossbeams, which hold up the power cables, are located at heights of 172, 190 and 208 metres. The crossbeams span 56 meters (lowest crossbeam), 72 metres (middle crossbeam) and 57 metres (highest crossbeam). Each pylon has a self-propelled climbing elevator for maintenance of the aircraft warning lights; each elevator runs inside a steel tube in the centre of the mast, around which there is a spiral staircase. * A 62-metre-tall anchor pylon on the Schleswig-Holstein side. The enormous height of the two carrying pylons ensures that the passage height requirement of 75 metres over the Elbe demanded by German authorities is met. The height requirement ensures that large ships are able to enter Hamburg's deep-water port. Of the 12 power cables of the Elbe crossing 2, only six were used immediately after construction. The others were installed for future use but grounded at the two anchor masts of the Elbe crossing 2 because of the difficulties of pulling cables over the Elbe if more capacity were needed later. In the 1990s it was decided to electrify Schleswig-Holstein's railways and to use some of the unused power lines to supply electric energy to those tracks. As a result, four cables now carry 110 kV single-phase AC for the Deutsche Bahn. This makes the pylons of Elbe Crossing 2 the tallest pylons used for carrying currents for traction current. However the tallest pylons exclusively carrying single-phase AC circuits are that of Bremen-Industriehafen Weser Powerline Crossing. Image:Strommast.hetlingen.gesamt.wmt.jpg|The pylon of the Elbe 2 crossing near Hetlingen Image:Strommast.hetlingen.Unterbau.wmt.jpg|Close-up view of the construction Image:Strommast.hetlingen.detail.wmt.jpg|Detail view of the pylon Image:Abspannmast-elbekreuzung.JPG|Anchor pylon on the southern side, standing on a 18×18 metres concrete foundation ==External links== * * * * http://skyscraperpage.com/diagrams/?b60894 * http://skyscraperpage.com/diagrams/?b41642 * http://skyscraperpage.com/diagrams/?b58848 * http://skyscraperpage.com/diagrams/?b60896 * http://bbs.keyhole.com/ubb/showthreaded.php/Number/115223 * (Google Maps: Pylon on Lühesand ) * (Google Maps: pylon on the shore of Schleswig-Holstein ) 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Elbe Crossing 2」の詳細全文を読む スポンサード リンク
|